Remove this ad

avatar

comein223

Posts: 12 Member Since: 11/25/09

Lead

Nov 26 09 2:48 AM

Tags : :

Follow these steps if, when you turn your computer on, it promptly powers back off. You'll probably hear the fans inside your computer turn on, see the lights on the front of your computer turn on or flash, and then it will all stop - always before the boot process is complete. You may or may not also hear beeping coming from inside your PC.
Note: As in the previous scenario, don't worry about what state your monitor is in. You may have a monitor issue as well but it's not possible to troubleshoot it quite yet

Quote    Reply   
Remove this ad
Remove this ad
avatar

comein223

Posts: 12 Member Since:11/25/09

#1 [url]

Nov 26 09 2:49 AM

  1. Computer turns on but nothing shows on screen. If your computer seems to be receiving power after turning it on but you don't see anything on your monitor, try these troubleshooting steps.
    In these situations, the power lights will stay on, you'll likely hear the fans inside your PC running, and you may or may not hear one or more beeps coming from the computer.
    This situation is probably the most common in my experience working with computers that won't start. Unfortunately it's also one of the most difficult to troubleshoot.

Quote    Reply   
avatar

comein223

Posts: 12 Member Since:11/25/09

#2 [url]

Nov 26 09 2:49 AM

  1. Computer turns on but stops booting during the POST. Use this guide when your computer powers on, shows at least some information on the monitor, but then stops for any reason during the Power On Self Test.
    Use this troubleshooting guide primarily if you receive a BIOS error message during the POST but also if your PC locks up during the POST without an on-screen message.
    Important: If you're having an issue during the loading of the operating system, which occurs after the Power On Self Test is complete, see Step 6.

Quote    Reply   
avatar

comein223

Posts: 12 Member Since:11/25/09

#3 [url]

Nov 26 09 2:49 AM

  1. Computer turns on but an error message prevents the operating system from loading completely. If your computer begins to load Windows but then stops booting and displays an error message, you're best bet is to troubleshoot the problem based on the specific error message.
    If you don't find instructions on resolving the specific error you see, see the first tip below for information on requesting more assistance from the forum on this site.

Quote    Reply   
Remove this ad
avatar

Ivor

Posts: 25 Member Since:05/17/16

#6 [url]

May 29 16 1:01 PM

I faced this issue last summer and it was caused by the fan running slow. I changed the fan and the computer started working fine. Check the fan and the temperature during the summer since it can get hot inside the machine.

Quote    Reply   
Remove this ad
Add Reply

Quick Reply

bbcode help